Use as a replacement for hot asphalt in built-up roofing applications. Designed for bonding layers of asphalt coated base sheets. Provides cohesive strength for a reliable roof. Eliminates burn and fire hazards of hot asphalt. Offers greater cold weather flexibility than hot asphalt. Made from asphalt, solvent, and organic fibers. Not for use over solvent-sensitive insulation. Not recommended for saturated felt. Conforms to ASTM D-3019 type III. UL Classified for class A and B fire rated roof coverings. Apply with brush, roller or squeegee. Apply uniformly between layers of roofing at the rate of 1.5 - 2 gallons per 100 sq. ft. Coverage varies with smoothness and porosity of surface coated. Coverage of 3 gallons per 100 sq. ft. when used to

Use as a replacement for hot asphalt in built-up roofing applications. Designed for bonding layers of asphalt coated base sheets. Provides cohesive strength for a reliable roof. Eliminates burn and fire hazards of hot asphalt. Offers greater cold weather flexibility than hot asphalt. Made from asphalt, solvent, and organic fibers. Not for use over solvent-sensitive insulation. Not recommended for saturated felt. Conforms to ASTM D-3019 type III. UL Classified for class A and B fire rated roof coverings. Apply with brush, roller or squeegee. Apply uniformly between layers of roofing at the rate of 1.5 - 2 gallons per 100 sq. ft. Coverage varies with smoothness and porosity of surface coated. Coverage of 3 gallons per 100 sq. ft. when used to

Use as a protective roof coating for new or existing composition roofs with smooth surfaces, as a base coat for reflective coatings, waterproofing adhesive for polyester systems, and as an anti-corrosive protection for metal roofs, steel structures, pipes, and tanks above or below ground level. Solvent free, asphalt emulsified with Bentonite clay and water. Applied cold, non-flammable while wet, corrosion-resistant, and waterproof when dry. Does not crack, run, or sag under extreme weather conditions. Complies with ASTM D-1227-95 Type III, Class I. U.L Classified. FM approved. Covers approximately 100 sq ft per 3-4 gallons when applied as one coat.

Use as a protective roof coating for new or existing composition roofs with smooth surfaces, as a base coat for reflective coatings, waterproofing adhesive for polyester systems, and as an anti-corrosive protection for metal roofs, steel structures, pipes, and tanks above or below ground level. Solvent free, asphalt emulsified with Bentonite clay and water. Applied cold, non-flammable while wet, corrosion-resistant, and waterproof when dry. Does not crack, run, or sag under extreme weather conditions. Complies with ASTM D-1227-95 Type III, Class I. U.L Classified. FM approved. Covers approximately 100 sq ft per 3-4 gallons when applied as one coat.

HENRY #558 FIBER ALUM ROOF GAL

HENRY #558 FIBER ALUM ROOF 5GAL

Advanced waterproofing technology, reduces heat-build up, professional grade. Product forms a thick, rubberized shield that expands and contracts to prevent cracking and roof damage. Provides a highly protective barrier which reflects the sun's UV rays. Covers approximately 50-75 sq. ft. per gallon per coat. Meets Energy Star performance ratings.